CaracterísticasFeatures and benefits:
LoRad is the ONLY audio grade mains cable in the world with full European safety approval. Safety approved in compliance with HD 21.5 S3
SAFE for Domestic use, does NOT affect household insurance policy.
Meets all CE criteria with regards to safety and use in domestic situations.
If you are in the market for an audio grade replacement mains cable, and you're visiting this website for factual information, we would advise you to check with our competitors to find out if the cable they are using is CE-approved.
As such, you should check with your local Trading Standards Office to find out if the replacement mains cable you are considering is suitable for domestic use. Some are only suitable, and approved, for use in fixed installations, such as within cavity walls - they are not necessarily approved for use going from power socket to device, as they may not have passed the CE-flex-test (which ensures the cable is safe if flexed for up 2x 30,000 times - solid core cables are not usually designed to be flexible and hence may fracture if flexed).
Also check with your insurer to see if your household and building insurance policy covers you if you are using a non-approved electrical cable.
Most after-market branded mains cables do NOT use a CE-approved cable.
Purpose designed as an AUDIO
GRADE replacement mains cable. Isn't used for anything else.
Isn't designed for anything else.
Isn't a speaker cable used for power !!
3x 1.5 sq. mm conductors
LoRad 1.5: Compact external diameter for low power devices. Capable of carrying upto 10 Amps (@ 230V).
Tin-plated OFC conductors. Little chance of corrosion over time.
Colour coded insulating jackets. Easy and safe to wire up (colours conform to standard wiring configuration:
Brown for Live
Blue for Neutral
Yellow & Green for Earth
Fully Patented shielding Minimises RF radiation to other nearby low level signal cables.
Doesn't use a separate uninsulated drain wire. Easy and safe to wire up.
Doesn't cause short circuits under high flexing conditions.
Many brands of shielded mains cables utilise an uninsulated multi-stranded "drain" wire, that under heavy flexing and/or over time can "slice" into any one (or more) of the power carrying conductors - most other brands of cable use this design and over time it is possible for the drain wire to short out one of the other conductors.
Flexible, yet tough outer covering. Easy to position and easy to connect to many types of connectors.
LoRad 1.5: 8mm outer diameter
LoRad can be used with most types of re-wireable mains connectors, as follows: UK, IEC320, Schuko, etc.
LoRad 1.5 - UK, IEC320, Schuko, etc.
Specification: 05VA7V-H 3G2.5