Krell Industries Illusion II - 17286

Krell Industries Illusion II

  • 0 valoraciones

En stock

Amplía tu garantía

Financia tu compra

Preamplificador estereofónico.


Illusion II Preamplifier

The Illusion II is the perfect centerpiece for a world class digital and analog audio system. Added to the normal selection of balanced and single- ended inputs are five digital inputs. The digital module features AES/EBU, coaxial, and optical digital inputs for use with streaming devices or other digital sources.

Circuitry Highlights
The Illusion II preamplifier is a dual monaural design with the left and right channels afforded their own power supply regulation and individual circuit boards. All signal gain is executed with surface mount technology using proprietary multiple-output current mirrors with nearly 500 times the open loop linearity of other designs. Featuring 700 kHz bandwidth in a zero feedback, balanced, Krell Current Mode design, the Illusion II shares the same design philosophy as its bigger brother, the flagship Illusion preamplifier. Negative feedback is not used anywhere in the preamp, nor is it necessary. Open-loop distortion is typically less than 0.003%. The volume control is realized with a balanced resistor ladder - bandwidth and transient response of the preamp circuitry are virtually unaffected by the volume setting. The headphone circuitry is identical to the main circuitry, offering private listening with the same performance as speaker playback.

Digital Module Highlights
The digital module supports up to 24 bit/192kHz LPCM. All digital signals are fed to an ESS Sabre DAC and then sent to Krell’s Current Mode, discrete, balanced analog circuitry.

Power Supply Highlights
Oversized for a preamplifier, the power supply features a 95 VA transformer and 40,000 µF of capacitance giving it the ability to respond quickly to musical demands. The large power supply improves noise rejection and renders the Illusion II impervious to all but the most severe AC voltage power fluctuations. A new eco-friendly standby mode reduces power consumption to 2W.

Illusion II Preamplifier
Analog Inputs

    2 pr. balanced via XLR connectors
    3 pr. singleended via RCA connectors

Digital Inputs

    1 AES/EBU via XLR connector
    2 coaxial via RCA connectors
    2 optical via Toslink connectors

Main outputs

    1 balanced via XLR connectors
    1 pr. single]ended via RCA connectors

Headphone output

    1 via 3-conductor 6.35 mm (1/4 inch) connector

Control inputs

    1 RS-232 input via a 9-pin D-subminiature connector
    1 remote IR detector input via a 3-conductor 3.5 mm connector
    1 12 VDC trigger input via 2-conductor 3.5 mm connector

Control outputs

    2 individually programmable 12 VDC trigger outputs via 2-conductor 3.5mm connectors (30 mA maximum per output)

Input impedance

       Balanced: 40kΩ
       Single: Ended 20kΩ

    Output impedance
    Balanced: 310 Ω
    Single-ended: 155 Ω
    Headphone: <3.0Ω


    Balanced: 12.0 dB
    6 dB (single-ended output)
    Singleended: 6.0 dB
    Headphone: 5.1 dB with 32 Ω load

Volume control

    Current mode, 12-bit, discrete R-2R ladder

Input overload

    > 7.0 V RMS balanced or single-ended

Output overload

    Balanced: >16 V RMS
    Single-ended: >8.0 V RMS
    Headphone: >3.0 V RMS, 32 Ω load

Frequency response

    20 Hz to 20 kHz +0, -0.02 dB
    0.25 Hz to 1.2 MHz +0, -3 dB

Total harmonic distortion plus noise

    Balanced Output: <0.003%, 20 Hz to 20 kHz, at 4.0 V RMS
    Headphone: <0.09%, 20 Hz to 20 kHz, 2.0 V RMS, 32 Ω load

Signal-to-noise ratio

    100 dB wideband, unweighted
    107 dB "A"-weighted, both referred to 4.0 V RMS balanced

Power consumption

    Standby: <2 Watts
    Power on: 40 Watts

Preamplifier only:

    17.3 in.W x 3.8 in. H x 18.3 in. D
    43.8 em W x 9.7 em H x 46.4 em D


    Shipped: 38 lbs., 17.2 kg
    Preamplifier only: 23 lbs., 10.4 kg

Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Si continua navegando, consideramos que acepta su uso.