CaracterísticasMachined pure titanium base
The base that supports the magnetic circuit and vibration system is made of precisely machined pure titanium materials. This enables it to serve as a solid base to support stable playback capability.
Quad hybrid lead wire
Quad hybrid lead wires with a balanced blend of gold clad, 7N-OFC, PCOCC and OFC are used in pursuit of the ideal balance with the main cartridge unit.
Special line contact stylus and solid boron cantilever with a 0.26 mm diameter
The cartridge features a special line contact stylus with a 40µm x 7µm curvature radius at the stylus tip. This not only ensures that the music signals engraved in the analogue records will be read out completely but also it gives expression to the highest dynamic compliance of the series. By firmly embedding this line contact stylus in a solid boron cantilever with its 0.26 mm diameter and by bonding it in place, the music signals read by the tip of the stylus are transmitted reliably to the power-generating coils.
Neodymium magnet and permendur yoke have drastically increased the magnetic energy
The magnet is a neodymium magnet with a maximum energy product BHmax of 50[kJ/m3] while used as the yoke is a permendur yoke with a high saturation flux density and excellent magnetic materials. Together, they further boost the magnetic field concentrated in the coil gap area.
PCOCC used for coils and terminal pins
PCOCC does not give rise to crystalline interfacing in the transmission direction so audiophiles can enjoy pure transmissions.
VC mold for minimizing unnecessary vibration
The VC mold that holds the coils in place is made of a hard synthetic resin which is combined with potassium titanate for increased strength and rigidity.
Type: Dual Moving Coil
Frequency Response: 15 to 50,000 Hz
Channel Separation: 30 dB (1 kHz)
Channel Balance: 0.5 dB (1 kHz)
Coil Impedance: 12 W (1 kHz)
DC Resistance: 12 W
Force d’Appui: 1.8 à 2.2 g (standard 2.0g)
Tracking Force: 1.8 to 2.2 g (standard 2.0 g)
Vertical Tracking Angle: 23 degrees
Recommended Load Impedance: Min 100 W
Coil Inductance: 25 mH (1 kHz)
Static Compliance: 35 x 10 – 6 cm / dyne
Dynamic Compliance: 18 x 10 – 6 cm / dyne (100 Hz)
Output Voltage: 0.4 mV (at 1 kHz, 5 cm/sec)
Stylus Shape: Line Contact Stylus
Cantilever: 0.26 mm Ø solid boron
Stylus Construction: Nude square shank
Mount: 1/2” centers
Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Weight: 10.5 g
Accessories: Non magnetic screw driver; 1 brush; 2 washers; 2 x 12 mm mounting screws;2 x 18 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6106) (standard AT-OC9/III is delivered with AT6101)